Plate-Master 220V Gold Contact Repair SRS-069
The plate master system cleans and electroplates printed circuit board connector contacts and other electronic assemblies. The Quik Plate System allows you to clean and electroplate printed circuit boards and electronic assemblies. Standard supplies include gold solution, nickel solution, and electroclean. Available optionally are tin, lead, copper, and silver plating solutions. The SRS-069 has voltage and current control, is microprocessor controlled, which automatically adjusts voltage and current for depletion in solution for military specification plating. The SRS-069 Quik Plate is a low-power system. The control circuit is a precision voltage source where the output voltage controls the activation of the plating solution. This voltage is controlled to greater than three percent by the internal regulator.
The current control on the SRS-069 Quk Plate determines the rate and the amount of plating that is being deposited. The current is a precision current source that ensures uniform plating, and when set, will not allow burning or arcing. The precision current control setting changes the gain of the difference amplifer and when the setting and current are the same, the amplifier controls the regulator from supplying any more current.
ACCURATE DEPOSITION
Cleaning and plating electrolysis is accomplished by the use of a plating point probe. The solutions are accurately deposited using easy-to-handle brush-tipped applicators. Electroplating Control settings are simple to select by reference to a predetermined chart.
Plate-Master
The Plate-Master is used most commonly to repair Gold Finger Contacts on circuit boards, but the system may be used to electroplate a variety of materials, e.g., lead, tin, copper, nickel, aluminum, and gold.
Voltage Control
The SRS-069 is a low-power system with a precision voltage source where the output voltage controls the activation of the plating solution. This voltage is controlled within three percent by the internal regulator.
Current Control
The current control is a precision source that determines the rate and the amount of plating that is deposited, ensuring a uniform plating thickness when set, preventing the possibility of burning or arcing. The control setting changes the gain of an operational amplifier, and when proportional, prevents further current from being applied.
Specifications:
Model: SRS-069
Voltage: 220VAC, 50/60Hz
Part: 0690-2000
Diamentions: 6.75"L x 7.35"W x 5.25"H
Weight 5lbs
Motorola Part Number RLN4624A
