SMD-625 Digital Tweezer System 220VAC | Part#0625-2402

Closed-Loop Thermal Control

The SMD-625 regulates tweezer-tip temperature through a closed-loop control system. Its digital interface provides a controlled working range for component removal and installation while maintaining listed idle stability within 2°F.

Small-Component Rework

The thermal tweezer handpiece applies heat to both sides of a component at the same time. This makes the system well suited for small PLCC and SOIC packages as well as chip resistors, capacitors, and other two-sided devices.

Interchangeable Tweezer Tips

The included chip-component tip pair handles common chip devices. Optional matched tip pairs are available for SOT and SOIC packages in several sizes, allowing the same station to support a wider range of component geometries.

Compact Benchtop Design

At 6 × 5 × 2.75 inches and 3.5 pounds, the SMD-625 provides dedicated thermal-tweezer capability without requiring a large amount of bench space. A holder and handle insulator are included for organized operation.

Key Features

• ✓ Digital closed-loop control
• ✓ 450–900°F operating range
• ✓ 220VAC, 50Hz configuration
• ✓ Thermal tweezer handpiece
• ✓ Simultaneous two-sided heating
• ✓ PLCC and SOIC rework
• ✓ Chip resistor and capacitor rework
• ✓ Interchangeable tip pairs
• ✓ Compact 3.5-pound system
• ✓ Military standards and CE listed

Need help selecting the correct tweezer tips?

Speak with an APE application specialist about component packages, tip geometry, replacement parts, or system compatibility.