The plate master system cleans and electroplates printed circuit board connector contacts and other electronic assemblies.
Motorola Part Number RLN4624A
**PRICE ONLY AVAILABLE ONLINE** ACCURATE DEPOSITION Cleaning and plating electrolysis is accomplished by the use of of a plating point probe. The solutions are accurately deposited using easy-to-handle brush tipped applicators. Electroplating Control settings are simple to select by reference to a predetermined chart.
Plate-Master
The Plate-Master is used most commonly to repair Gold Finger Contacts on circuit boards, but the system may be used to electroplate a variety of materials, e.g., lead, tin, copper to nickel, aluminum, and gold.
Voltage Control
The SRS-069 is a low power system with a precision voltage source where the output voltage controls the activation of the plating solution. This voltage is controlled to with in three percent by the internal regulator.
Current Control
The current control is a precision source that determines the rate and the amount of plating that is deposited, ensuring a uniform plating thickness when set, preventing the possibility of burning or arcing. The control setting changes the gain of an operational amplifier, and when proportional, prevents further current from being applied.
Before and After
These Before and After photographs indicate the finished result possible using the SRS-069, combined with the EX-680 Desolder System.
Before
After
