EX-750 Repair & Manufacturing Desolder & Solder Station 110VAC

Model EX-750

Overview

The EX 750 REPAIR AND MANUFACTURING SYSTEM is the ideal station for sensitive, expensive electronic circuit. The EX 750 is a surface-mount and conventional component repair and rework station. Tip temperature is electronically controlled from 450° F to 900° F. Two programmable digital controllers feature responsive closed loop temperature control with LED readout set & operating temperature and an instant-rise internal vacuum pump. Zero voltage thyristor insures that no high voltage spikes or magnetic fields will be present on the soldering or desoldering tip. An ergonomically designed handpiece for solder reflow of PLCC surface mount devices with temperature controlled high thermal mass heaters target the heat to the leads without causing damage to the adjacent component or board. New stop clog filter remove flux fumes and other foreign matter before contamination of the internal pump.

Standard System Includes:

• EX-1700 Desolder Handpiece
• Hot Air Jet-Reflow Tool Kit
• Sensor Control Solder Iron
• Power supply with digital temperature control
• Self contained instant rise pump
• Dual iron holder assembly with integral cleaning station
• Thermal Quad Pack Tweezer
• Quad Pack Tweezer Holder
• Cleaning Brushes
• Accessory Experimental Tip Kit
• Foot Pedal
• Operation Manual

Optional Features:

• Vacuum Pick and Place Wand
• Spare Kit
• Standard Track Repair Kit
• Starter Consumable Kit
• Vacuum Pick and Place Wand
• One Year Consumable Kit

Operating Temperature Range:

• Settable range for Extractor and Soldering Iron
• 450° F (232° C) To 900° F (482° C)
• Idle temperature stability : ±2.0F

Model EX-750 Specifications 

• 110/120 vac. 50/60 Hz
• 10.2″ Lx8.5″ Wx4.75″ H
• (25.9 cmL x 21.6 cm W x 12.0 cmH)
• Weight 14.5 lbs (6.58 Kg)
• Part No. 0750-2002

Safety Rating – in compliance with:

• DOD-STD-2000-A
• MIL-S-45743E
• WS-6536E