The Chipper SMD-500 is an affordable, integrated system for SMT component PCB rework and repair. Replace older " Contact" rework tools with the latest Low Temperature PCB rework technology for reworking SMT components without damage. One-button programming makes setting a temp a breeze. Hands-free foot pedal operation allows the tech to make adjustments while the solder is in a reflow condition.
The Chipper SMD-500 is used for low-volume SMT component PCB rework, PCB repair, and prototyping.
Motorola Part Number R1428
Lead Free Rework
For Lead Free rework and repair, the Chipper can be used with an APE Bottom Heater featured on page 10.
PCB Rework Holder
A standard 8" x 8" (203 x 203 mm) PCB repair Holder is included for most PCB sizes, adjustable in every axis. A board release mechanism allows each PCB to snap into place and be quickly released when required. In addition, a Z-Axis nozzle clearance piston avoids profile obstructions when locating and clearing SMT components.
Automatic Lift Off
An automatic SMT component vacuum pick-up lifts the SMT component from the PCB once reflowed and continues to hold the part during the system's cooling cycle.
Specifications:
- Power 1200 Watts
- Current 10.90 Amp @ 110V, 5.45 Amp @220V
- Dimension 14" x 8" x 12" (203 x 180 x 305 mm)
- PCB Holder Standard 8" x 8" (203 x 203 mm)
- Nozzles included:(User may select alternatives)
- 8100-0000-44 0.80" x 0.80" (20.3 x 20.3 mm)
- 8100-1424 (18.0 x 10.2 mm)
- 8100-1075 1.00" x 0.75" (25.4 x 19.0 mm)
- Temperature Selectable Fahrenheit or Celsius
- Air Velocity <12.7 CFM
- Vacuum Internal Pump
- Air Source Internal Blower
- Shipping 24"x12" x 16", Weight 28 lb (12.73 kg)
