7-Inch Panel Preheat + Z-Axis
APE Flo-Master ZP 220V SMD Rework System
The APE Flo-Master SMD-5000-ZP is a professional convection rework and repair system for small to medium PCB assemblies, including BGA and other surface-mount components that require controlled thermal profiling.
This 220V system combines automatic timed process control, a 1,200W bottom heater, a 7-inch panel preheater, and Z-axis positioning to support controlled, repeatable lead-free rework.
Model APE-5000-2002-ZP • 220VAC • 1,800W
Convection Rework for Lead-Free Assemblies
High-power convection heating supports reflow at controlled oven-style temperatures. This approach helps deliver heat evenly to the target component while reducing the risk of excessive temperatures around adjacent components.
Seven-Inch Panel Preheat
The integrated panel-preheat section applies controlled heat beneath the board before and during rework. Bottom heating helps reduce thermal shock, supports more uniform solder-joint temperatures, and improves process control on demanding assemblies.
Z-Axis Component Positioning
The Z-axis assembly provides controlled vertical positioning of the reflow head over the PCB. Combined with the included 8 × 12-inch frame board holder, it supports accurate setup for a broad range of SMT and BGA packages.
Repeatable Profile Control
Fuzzy-logic PID control, selectable Fahrenheit or Celsius display, and automatic timed operation give technicians a consistent process for component removal, site preparation, and replacement.
Key Features
- ✓Professional SMT and BGA rework system
- ✓1,800W system power
- ✓1,200W bottom heater
- ✓Seven-inch panel preheat
- ✓Z-axis reflow-head positioning
- ✓Automatic timed process control
- ✓Fuzzy-logic PID controller
- ✓Internal blower and vacuum pump
- ✓8 × 12-inch frame board holder
- ✓Six reflow nozzles included
Product Specifications
| Manufacturer |
APE |
| Product |
Flo-Master SMD-5000-ZP Rework System |
| APE Part Number |
5000-2002-ZP |
| Input Voltage |
220VAC |
| Power |
1,800W |
| Current |
10.9A at 220V |
| Bottom Heater |
1,200W |
| Panel Preheat |
7-inch panel |
| System Dimensions |
22.25 × 9.25 × 8.62 in |
| PCB Holder |
8 × 12 in (203 × 305 mm), frame style |
| Temperature Display |
Selectable °F or °C |
| Air Velocity |
Less than 12.7 CFM |
| Vacuum |
Internal pump |
| Air Source |
Internal blower |
| Controller |
Fuzzy-logic PID |
| System Weight |
55 lb |
| Warranty |
12 months |
Included Reflow Nozzles
- 8100-0000-44 — 0.80 × 0.80 in
- 8100-1424 — 0.71 × 0.40 in
- 8100-0132 — 1.20 × 1.20 in
- 8100-1414 — 1.40 × 1.40 in
- 8100-0000-20 — 0.50 × 0.50 in
- 8100-0000-68 — 1.10 × 1.10 in
Alternative nozzle sizes may be selected when configuring the system.
Additional Included Accessories
- SMT Tool Kit — Part 8100-1097
- Halogen Light — Part 8100-0598
✓
Panel Preheat and Z-Axis Included
Part 5000-2002-ZP combines convection rework, a 7-inch panel-preheat section, Z-axis positioning, an 8 × 12-inch board holder, six reflow nozzles, an SMT tool kit, and a halogen work light.
Need Help Configuring Your Flo-Master ZP?
Speak with an APE application specialist about board dimensions, component sizes, nozzle selection, and thermal-profile requirements.
Call 800-822-8646
|
