DESOLDERING TIPS
Tips Desoldering
Tips Desoldering Long Tips Curved Tips
(I.D. to fit Pace & Plug Tips) (Fits Pace MP-also for wire wrap pins) (30º bend)
I.D. Part No. I.D. Part No. I.D. Part No.
.018 1212-0018 .060 1212-2060 .025 1212-2125
.025 1212-0225 .040 1212-2040 .040 1212-2140
.040 1212-0440 .025 1212-2025 .060 1212-2160
.050 1212-0550
.060 1212-0660
.080 1212-0080
Assorted Tips 1212-1212
DESIGNED FOR MAXIMUM HEAT
CONDUCTIVITY AND OPTIMUM OPERATING
LIFE.
DESOLDER TIP SELECTION
INSIDE DIAMETER
The tip should be large enough to fit over the lead to be desoldered. A slight clearance
is necessary to allow the solder to flow through the tip. Although several tip Diameters
will work ideally, a tip diameter 1 1/3 the lead diameter is best.
OUTSIDE DIAMETER
The O.D of the tip should be less than the diameter of the circuit board pad. This is to
avoid burning or marking the board material. The tip wall thickness provides the path
of heat into solder joint. Thick walls are preferable for large solder joint and bigger
heat sinks to conduct the heat into the solder joint as quickly as possible.
TIP SPECIFICATIONS
A.P.E. Tips are manufactured to outlast any competitive tip on the market
today Three years of research and development and specialized tooling
allow us to introduce this tip with plating high conductivity copper with
corrosive-resistive- inner-lining for longer life and instant heat recover.
|
Shop Online